Source code for pygmt.src.inset

"""
inset - Create inset figures.
"""
import contextlib

from pygmt.clib import Session
from pygmt.helpers import build_arg_string, fmt_docstring, kwargs_to_strings, use_alias


@fmt_docstring
@contextlib.contextmanager
@use_alias(D="position", F="box", M="margin", N="no_clip", V="verbose")
@kwargs_to_strings(D="sequence", M="sequence")
def inset(self, **kwargs):
    r"""
    Create an inset figure to be placed within a larger figure.

    This function sets the position, frame, and margins for a smaller figure
    inside of the larger figure. Plotting functions that are called within the
    context manager are added to the inset figure.

    Full option list at :gmt-docs:`inset.html`

    {aliases}

    Parameters
    ----------
    position : str or list
        *xmin/xmax/ymin/ymax*\ [**+r**][**+u**\ *unit*]] \
        | [**g**\|\ **j**\|\ **J**\|\ **n**\|\ **x**]\ *refpoint*\
        **+w**\ *width*\ [/*height*][**+j**\ *justify*]
        [**+o**\ *dx*\ [/*dy*]]

        *This is the only required argument.*
        Define the map inset rectangle on the map. Specify the rectangle
        in one of three ways:

        Append **g**\ *lon*/*lat* for map (user) coordinates,
        **j**\ *code* or **J**\ *code* for setting the *refpoint* via a
        2-char justification code \ that refers to the (invisible)
        projected map bounding box, **n**\ *xn*/*yn* for normalized (0-1)
        bounding box coordinates, or **x**\ *x*/*y* for plot
        coordinates (inches, cm, points, append unit).
        All but **x** requires both ``region`` and ``projection`` to be
        specified. You can offset the reference point via
        **+o**\ *dx*/*dy* in the direction implied by *code* or
        **+j**\ *justify*.

        Alternatively, Give *west/east/south/north* of geographic
        rectangle bounded by parallels and meridians; append **+r** if the
        coordinates instead are the lower left and upper right corners of
        the desired rectangle. (Or, give *xmin/xmax/ymin/ymax* of bounding
        rectangle in projected coordinates and optionally
        append **+u**\ *unit* [Default coordinate unit is meter (e)].

        Append **+w**\ *width*\ [/*height*] of bounding rectangle or box
        in plot coordinates (inches, cm, etc.). By default, the anchor
        point on the scale is assumed to be the bottom left corner (BL),
        but this can be changed by appending **+j** followed by a 2-char
        justification code *justify*.
        **Note**: If **j** is used then *justify* defaults to the same
        as *refpoint*, if **J** is used then *justify* defaults to the
        mirror opposite of *refpoint*. Specify inset box attributes via
        the ``box`` option [outline only].
    box : str or bool
        [**+c**\ *clearances*][**+g**\ *fill*][**+i**\ [[*gap*/]\
        *pen*]][**+p**\ [*pen*]][**+r**\ [*radius*]][**+s**\
        [[*dx*/*dy*/][*shade*]]]

        If passed ``True``, this draws a rectangular box around the map
        inset using the default pen; specify a different pen
        with **+p**\ *pen*. Add **+g**\ *fill* to fill the logo box
        [Default is no fill].
        Append **+c**\ *clearance*  where *clearance* is either
        *gap*, *xgap*\ /\ *ygap*, or *lgap*\ /\ *rgap*\ /\ *bgap*\ /\
        *tgap* where these items are uniform, separate in x- and
        y-direction, or individual side spacings between logo and border.
        Append **+i** to draw a secondary, inner border as well. We use a
        uniform *gap* between borders of 2\ **p** and the default pen
        unless other values are specified. Append **+r** to draw rounded
        rectangular borders instead, with a 6\ **p** corner radius. You
        can override this radius by appending another value. Append
        **+s** to draw an offset background shaded region. Here, *dx*/*dy*
        indicates the shift relative to the foreground frame
        [4\ **p**/-4\ **p**] and *shade* sets the fill style to use for
        shading [Default is gray50].
    margin : int or str or list
        This is clearance that is added around the inside of the inset.
        Plotting will take place within the inner region only. The margins
        can be a single value, a pair of values separated (for setting
        separate horizontal and vertical margins), or the full set of four
        margins (for setting separate left, right, bottom, and top
        margins). When passing multiple values, it can be either a list or
        a string with the values separated by forward
        slashes [Default is no margins].
    no_clip : bool
        Do NOT clip features extruding outside map inset boundaries [Default
        will clip].
    {V}

    Examples
    --------
    >>> import pygmt
    >>>
    >>> # Create the larger figure
    >>> fig = pygmt.Figure()
    >>> fig.coast(region="MG+r2", water="lightblue", shorelines="thin")
    >>> # Use a "with" statement to initialize the inset context manager
    >>> # Setting the position to top left and a width of 3.5 centimeters
    >>> with fig.inset(position="jTL+w3.5c+o0.2c", margin=0, box="+pgreen"):
    ...     # Map elements under the "with" statement are plotted in the inset
    ...     fig.coast(
    ...         region="g",
    ...         projection="G47/-20/3.5c",
    ...         land="gray",
    ...         water="white",
    ...         dcw="MG+gred",
    ...     )
    ...
    >>> # Map elements outside the "with" block are plotted in the main figure
    >>> fig.logo(position="jBR+o0.2c+w3c")
    >>> fig.show()
    <IPython.core.display.Image object>
    """
    kwargs = self._preprocess(**kwargs)  # pylint: disable=protected-access
    with Session() as lib:
        try:
            lib.call_module("inset", f"begin {build_arg_string(kwargs)}")
            yield
        finally:
            v_arg = build_arg_string({"V": kwargs.get("V")})
            lib.call_module("inset", f"end {v_arg}".strip())